Simplici-kits are an all in one Mushroom Growing System, allowing the customer to inoculate the MycoBox inside the complete safety of the Simplici-Bag. Comes completely sterilised with the Substrate Box, moistened perlite and Easy-Glide-Bag-Sealer already in position.
Less work for us.
Less work for you.
Lower cost to produce.
Better for the environment.
The Simplici-kit comes fully sterilised and assembled. We place everything you need apart from the spores inside the Simplici-bag. When you kit arrives, simply unroll the kit and wipe the injection port ready for injection with your chosen spores.
The Simplici-Lid is pierced inside the safety of the Simplici-Bag which comes with a securely fixed Self Healing Injection Port for inoculation and a 0.2 micron filter patch to keep the contamination out of the bag
So clean, so simple.
By removing the 6 expensive, time consuming and wasteful injection ports from the lid as well as the filter strips. We are able to save time in production, make the product at a lower cost than than ever before and look after Mother Earth a little too.
Just one quick wipe with the included alcohol swap and your ready to start inoculating your Kit. Use the included 14 gauge needle to pierce the lid and inoculate the substrate in as many places as you like. Keep the needle inside the Bag and move the Self Healing Injection port to where ever you want. Dont worry if you break the lid this time around. This time the Simplici-bag will save your efforts from contamination
Packaging up the Substrate Box and pre-moistened perlite inside the Simplici-Bag means that there is no chance of contamination entering the Substrate Box Via the lid to box seal, injection port to lid seal or via a faulty or wet filter strip at any time during the colonisation period.
Removing all these little extra steps means the Simplici-Kit is the ideal solution for Beginners Or Professionals..... Especially as the Launch Price is only £19.99.
When you receive your Simplici-Kit product, simply unroll the Simplici-Bag. Shake all the perlite to the bottom of the bag. With ease the Single Self Healing Injection port is cleaned. The included thick gauge Gamma Irradiated STERILE needle is used to pierce the Self Healing Injection Port on the Simplici-Bag. When inside the bag, the needle can be position anywhere on the lid. The Customer can then pierce the lid multiple times to inoculate the Substrate inside the box all in the safety of the Simplici-Bag. It doesn't matter if the lid cracks or breaks during the injections as you are inside the Simplici-Bag already.
When the substrate is fully colonised and all white, you may slide the Easy-Glide-Sealer-Stick to open the bag. Remove the lid from the box and care for the Simplici-Kit in the same way as our standard Dutch Style Grain Box.
To get started. Simply remove the outer WHITE protective bag.
Hold the Simplici-Bag by the coloured Easy-Glide-sealer-Stick. Lift the stick up and the Simplici-Bag will simply unroll its self. You will find the included alcohol swab wrapped up in the bag also. DO NOT WIPE THE INJECTION PORT JUST YET.
Your syringe/s will come in a sealed bag which will also include your thick 14 gauge needle/s. Please open this packet and choose the syringe you would like to work with. Please also select one needle per syringe but DO NOT OPEN THE NEEDLE PACKET JUST YET..
You may now proceed to open the needle packet BUT leave the protective needle cap in place.
Quickly unscrew the black protective cap from the syringe and screw the needle in its place. With the needle cap on, the needle is kept sterile until use.
So that you have some space to work in. Please draw some air into the Simplici-Bag by slowly pulling the filter patch away from the rear plastic. DO NOT OPEN THE BAG. Air will slowly be drawn into the bag and this process will inflate the bag a little and give you room to move around.
With space to work you can now use the alcohol swab to clean the injection port. While the port is still wet from the wipe. shake the syringe one more time and remove the protective needle cap and instantly push the needle into the injection port on the Simplici-Bag.
Once the needle is inside the injection port it is protected by the Simplici-Bag. Take your time to Pierce the Simplici-Lid 1-6 times and inject equal amounts of spore solution into each hole.
When you have injected all the spore syringes contents into the Simplici-Kit. Use gravity to distribute the spore solution more efficiently. To do this simply stand the Simplici-Kit on its end and rotate the kit every 10 seconds.
Using the GRAVITY360 tek will easily take 2 weeks off your colonisation times.
With Brown Rice Flour and Horse Manure/Rye Grain version to follow up.
I will also be testing Inject and Forget versions of the following kits soon with a view to have all three substrate types as Inject and Forget Simplici-Kits.
Its late and i am tired.... I will add to this section as time goes on.
Take Care and chat Soon... To Simplici-ty and beyond
Mark and the Team
Hope you don't mind.
I wont be answer the phone today as I need to pack as many boxes as possible. I HAVE MASSIVE STAFF SHORTAGES and I need new employees. If you live in West Sussex and want to MAKE A DIFFERENCE. Please email me HERE